Agglomerated SAW Flux JH-1
- Description :
- Agglomerated SAW Flux JH-1
- Application :
- For Joint Welding of general structural steels,Twin wire, multi-wire welding and for welding from both sides in one pass High current-carrying capacity, situable for fillet welding with a large throat thickness
For Joint Welding of General Structural Steels
For Joint Welding of general structural steels
Twin wire, multi-wire welding and for welding from both sides in one pass
High current-carrying capacity, situable for fillet welding with a large throat thickness
Fluoride-basic tpye agglomerated flux
Basicity Index: 1. 4
Polarity. AC or DCEL
ISO 9001: 200& Quality Management System
Before welding. if moisture contamination is suspected from either improper storage condition or due to atmosphere exposure, the flux should be redried at 300 to 350'c for 2 hours
Magnesia Alumina Spinel Brick
Description : Magnesia Alumina Spinel Brick(MJ) is the main raw material with high purity magnesia and synthetic magnesia-alumina spinel.And the main crystal phase is magnesia and magnesia-alumina sp...
Alumina Insulating Brick
Description : It has the advantages of high temperature resistance,low thermal conductivity,low iron content,high compressive strength,good thermal stability and so on.
Mullite Insulating Brick
Description : It has high compressive strength,high temperature performance and good thermal shock stability.
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.