Home >

Converter Semi-dry Gunning Mix

Description :: Converter Semi-dry Gunning Mix

Application :: As a medium and small ladle wall lining material as a whole

Email : xiang_liu@hxref.com Whatsapp: Click here

Chat Now Send E-mail

Description parameter Related cases Related PRODUCTS Inquiry

Description parameter

Iteam	Modle	HXR80	HXR90
Chemical component（%）	MgO	≥80	≥90
	CaO	≤3	≤2.5
	SiO2	≤6	≤3.5
Junction square formula		Chenmical-ceramic	Chemical-ceramic
Compression strength（MPa）	110℃×12h	≥5	≥6
	1100℃×3h	≥4	≥5
	1500℃×3h	≥7	≥8
Breaking strength（MPa）	110℃×12h	≥40	≥42
	1100℃×3h	≥28	≥30
	1500℃×3h	≥31	≥40
Linear change rate（%）	1500℃×3h	-2	-1.5
Idiosyncratic	The new type of chemical ceramic composite binder is especially suitable foe gunning and maintenance of magnesia carbon brick lining.The adhesion rate is high，slag resistance and erosion resistance are good.
Range of application	Specially suitable for repair and repair of converter and lining of the same material.

Related cases

Related PRODUCTS

Alumina Castable

Description : It has the characteristics of high density,high strength,wear resistance and corrosion resistance.

Magnesia Gunning Mixes

Description : Compared with adiabatic panel,it can not only reduce the cost of material resistance of tonnage steel,but also reduce non-metallic inclusions in molten steel,improve the purity of molte...

Lightweight Castable for Aluminum Reduction Cell

Description : Lightweight Castable for Aluminum Electrolusis Cell Application : Two end face of aluminum electroysis cell

Self Flow Castable

Description : Self Flow Castable Application : Can be used for heating furnace, soaking furnace, tundish permanent lining, etc.

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.