13503820738

Home >

Agglomerated SAW Flux SJ101
Agglomerated SAW Flux SJ101

Agglomerated SAW Flux SJ101

Description :
Fluoride-basic type agglomerated flux
Application :
This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead.

Description parameter

Conforms to:GB/T 12470 f48a4-h10mn2 f48a2-h08mna,AWS A5.17 f7a4-eh14 f7a2-em12k f6a0-el8

Product information:Fluoride-basic type agglomerated flux

Basicity index: 1.4

Grain size: 10-40 mesh

Density: 1.2-1.25g/cm3

Polarity: DCEP or AC

Application:This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead

High impact toughness at low temperature:The flux has excellent welding performance, excellent slag removal, and good bead appearance,With different welding wire welding a variety of low alloy structural steel, for example pipe, boiler,pressure vessel, bridge, ship etc

Attention:Flux must be re-dried at 300-350"C(572-662f) for 60 mins before welding,Remove all rust, scale, paint and etc so as to obtain excellent weld metal In the multilayer welding, groove welding of backing welding demand low welding current and speed,Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance when using flux again

Packaging:25 Kg/bag, 25 Kg/bucket, 400 Kg/ton bag

For other forms of packaging, please contact us

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.