13503820738

Home >

Agglomerated SAW Flux SJ101G
Agglomerated SAW Flux SJ101G

Agglomerated SAW Flux SJ101G

Description :
Fluoride-basic type agglomerated flux
Application :
This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead

Description parameter

SJ101G Agglomerated SAW Flux

Conforms to

GB/T 12470 f48a4-h10mn2 f4ba2-h08mna

AWS A5.17 f7a4-eh14 f7a2-em12k

NBT47018-2011

Product information

Fluoride-basic type agglomerated flux

Basicity index: 1.6

Grain size: 10-40 mesh

Density: 1. 2-1. 25g/cm3

Polarity: DCEP or AC

Application

This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead

The input has a good impact toughness welding conditions in high fever, applied to single or double wire welding

The flux has excellent welding performance excellent slag removal, and good beaf appearance

Pressure equipment, X70, X80 grade pipeline steel welding, such as with the HO8MNMOA can be used for the welding of X70 pipeline steel

Other high strength low alloy steel such as boiler,bridges, ships and wind power generation and application of welding
Attention
Flux must be re-dried at 300-350 C(572-662"F)for 60 mins before welding

Remove all rust, scale, paint and etc. so as to obtain excellent weld metal

In the multilayer welding, groove welding of backing welding demand low welding current and speed

Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance when using flux again

Packaging

25 Kg/bag. 25 Kg/buckel, 400 Kg/ton bag

For other forms of packaging, please contact us.

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.