13503820738

Home >

Agglomerated SAW Flux SJ501
Agglomerated SAW Flux SJ501

Agglomerated SAW Flux SJ501

Description :
Aluminate-titanium type active agglomerated flux
Application :
This flux for acid flux has an obvious Si and a slight Mn increase on weld bead, and outstanding resistance to porosity, Particularly suitable for welding without strict clean base material of the occasion

Description parameter

SJ501

Conforms to

GB/T 5293 f5a0-h08a

AWS A5.17 f7a0-el12

Product information

Aluminate-titanium type active agglomerated flux

Basicity index: 0.7

Grain size: 10-60 mesh

Density: 1.4g/cm3

Polarity: DCEP or AC

Application

This flux for acid flux has an obvious Si and a slight Mn increase on weld bead, and outstanding resistance to porosity, Particularly suitable for welding without strict clean base material of the occasion

This flux is primarily designed for use in welding of high speed fillet welds using tandem or multiple arc welding systems, excellent slag removal, and good bead

The flux has excellent welding performance.

stable arc, the maximum welding current can reach 1000A

Cooperating with the appropriate welding wire this flux can be used for welding of low carbon steel, low alloy steel and heat resistant steel, used in ships, boiler pressure vessel welding.

Attention

Flux must be re-dried at 300-350c(572-662f)for 60 mins before welding

Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance when using flux again.

Packaging

25 Kg/bag, 25 Kg/bucket, 400 Kg/ton bag

For other forms of packaging, please contact us.

Inquiry

If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.