SJ301T Agglomerated SAW Flux
Silicon-manganese agglomerated flux
Basicity index: 1.1
Grain size: 10-40 mesh
Density: 1. 25g/cm3
Polarity: DCEP or AC
This flux has an obvious Si and a slight Mn increase on weld bead, and outstanding resistance to porosity.
The flux has excellent welding performance excellent slag removal, and good bead appearance.the deposited metal has good mechanical
General pressure vessel, structural steel, pipe steel, LPG Cylinder, wheel cylinder welding
Flux must be re-dried at 300-350c(572-662'f)for 60 mins before welding
Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance when using flux again.
25 Kg/bag, 25 Kg/bucket, 400 Kg/ton bag
For other forms of packaging, please contact us.
Agglomerated SAW Flux SJ301
Description : Silicon-calcium agglomerated flux Application : This flux has an obvious Si and a slight Mn increase on weld bead and outstanding resistance to porosity
Agglomerated SAW Flux SJ101Q
Description : Fluoride-basic type agglomerated flux Application : With a variety of low alloy structural steel, for example boiler, pressure vessel, bridge, ship wind tower and wing powder welding ...
Agglomerated SAW Flux SJ101G
Description : Fluoride-basic type agglomerated flux Application : This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.