Agglomerated SAW Flux SJ101Q
- Description :
- Fluoride-basic type agglomerated flux
- Application :
- With a variety of low alloy structural steel, for example boiler, pressure vessel, bridge, ship wind tower and wing powder welding etc, with high impact toughness at low temperature
SJ1010 Agglomerated SAW Flux
AWS A5. 17 f7a2-eh14
Fluoride-basic type agglomerated flux
Basicity index: 2.0
Grain size: 10-40 mesh
Density: 1. 3g/cm3
Polarity: DCEP or AC
With a variety of low alloy structural steel, for example boiler, pressure vessel, bridge, ship wind tower and wing powder welding etc, with high impact toughness at low temperature
Flux must be re-dried at 300-350 C(572-662f) for 60 mins before welding
Remove all rust, scale, paint and etc so as to obtain excellent weld metal
Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance when using flux again
25 Kg/bag, 25 Kg/bucket, 400 Kg/ton bag
For other forms of packaging, please contact us
Alumina Insulating Brick
Description : It has the advantages of high temperature resistance,low thermal conductivity,low iron content,high compressive strength,good thermal stability and so on.
Agglomerated SAW Flux SJ101
Description : Fluoride-basic type agglomerated flux Application : This flux is alkaline flux, which belongs to the metallurgy neutral; it hardly increases Si and Mn on weld bead.
Agglomerated SAW Flux JH-5
Description : Agglomerated SAW Flux JH-5 Application : Thin plate singe pass Applications without clean base material High speed welding, particularly those applications that require a very nice be...
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.