SJ301 Agglomerated SAW Flux
AWS A5.17 f5a0-em12k
Silicon-calcium agglomerated flux
Basicity index: 0.8
Grain size: 10-40 mesh
Polarity: DCEP or AC
This flux has an obvious Si and a slight Mn increase on weld bead and outstanding resistance to porosity
The slag produced by this flux is"short-slag which minimizes slag flow, a characteristic particularly well suited for small diameter circumferential joint welding
This flux can be used for general welding of 0235 mild steel, A, B pipeline steel
With suitable wire can be used for more material welding
Flux must be re-dried at 300-350c(572-662 F)for 60 mins before welding
Adding new flux regularly in order to avoid causing welding defect and bad welding bead appearance
when using flux again
25 Kg/bag. 25 Kg/bucket, 400 Kg/ton bag
For other forms of packaging, please contact us
Alumina Gunning Mixes
Description : Alumina Spraying Materials：Strong adhesion, volume stability, high strength, suitable for mechanized operation.
Alumina Insulating Brick
Description : It has the advantages of high temperature resistance,low thermal conductivity,low iron content,high compressive strength,good thermal stability and so on.
Mullite Insulating Brick
Description : It has high compressive strength,high temperature performance and good thermal shock stability.
If you have any suggestions or opinions about our products, please leave a message, and we will immediately answer your questions. Thanks for your support.